OrCAD one of the best and most professional software simulation and analysis electronic circuits and electronic design automation software division (Electronic Design Automation or abbreviated EDA) is. OrCAD consists of two words that in fact the state of Oregon was the birthplace of early versions of the software and CAD stands for Computer-aided design and computer design means is formed. Cadence SPB OrCAD OrCAD PCB set to Allegro PCB or also known, including various programs to design schematic, simulation and analysis of electronic is circuits.


Facilities and software features of Cadence SPB OrCAD:
- suitable graphical user environments and display circuit using icons
- OrCAD Capture and Capture CIS schematic design circuits in powerful environment
- Ability to design PCB (Printed Circuit Board stands and means the board or PCB)
- has an extensive library full of components and electronic devices
- Advanced simulation and analysis electronic circuits in a graphical environment PSpice
- environment Orcad PCB Designer / Editor to design and edit PCB
- Ability to interact with MATLAB and Simulink software

System Requirements:
Cadence Allegro and OrCAD 17.2-2016 Hardware and Software Requirements:

This section describes the system requirements for Windows.

Cadence Allegro and OrCAD products are integrated directly with Windows;
the products support hardware and peripherals supported by Windows. A list of
hardware and peripherals officially supported by Windows can be obtained from the Microsoft web page.

The products require updating certain Microsoft libraries in the Windows directory.
You must install the Cadence software using either a standalone install or a client install.
You may not be able to point to the software without installing.

Operating System:
Microsoft� Windows� 7 Professional, Enterprise, Ultimate or Home Premium
(64-bit); Windows 8 (64-bit) (All Service Packs); Windows 10 (64-bit); Windows 2008 R2 Server; Windows 2012 Server (All Service Packs).

Note: Cadence Allegro and OrCAD (Including EDM) products do not support
Windows 7 Starter and Home Basic. In addition, Windows Server support does not
include support for Windows Remote Desktop. Windows RT and Tablets are not supported.

Recommended Software"
-Microsoft� Internet Explorer� 11.0 or later

Minimum Hardware:
-Intel� Pentium� 4 or AMD Athlon XP 2000 with multi-core CPU
-Ram:8 GB RAM
-Virtual memory at least twice physical memory
-50 GB free disk space
-1,024 x 768 display resolution with true color (16-bit color)
-Broadband Internet connection for some service
-Ethernet card (for network communications and security hostID)
-Three-button Microsoft-compatible mouse

Recommended Hardware:
-Intel� Core� 2 Duo 2.66 GHz or AMD Athlon 64 X2 5200+
-Note: Faster processors are preferred.
-RAM:8 GB RAM
-Disk:500 GB free disk space
-Display:1,280 x 1024 display resolution with true color (at least 32bit color)
-GPU:A dedicated graphics card
-Display:Dual monitors

INSTALLATION GUIDE
Version 17.2:

Remove the previous version and install the Cadence License Manager 12.06 and the show-license request file, close it. Then the program with the default settings, install it.

Now LicenseManager folder in the folder Crack in the installation program (by default C: \ Cadence)
copy and file it with the Run as administrator LicenseManagerPubKey.bat on the run. Tools folder in
the path C: \ Cadence \ SPB_17.2 copy and run the file and wait for the operation to be performed ToolsPubKey.bat.

LicenseServerConfiguration.exe file to the path C: \ Cadence \ LicenseManager Run as administrator
to run the License.lic files in the folder, enter the crack and without changing
the Double-click Next and then Finish. A new license in the path C: \ Cadence \ LicenseManager
named license.dat is produced, it will run Notepad with only two lines after the DAEMON
cdslmd (including address and port is cdslmd.exe file) and delete the file save.

Finally lmtools.exe file to run the same route and in the tab Start / Stop / Reread first on Stop Server and then click Start Server or ReRead License File again.

! Installing the update cause failure of fluff and not a result of the program and should be done before installing the following:

To install the program and folder names SPB_17.2 change; for example SPB_17.2
The new folder name and file SPB_17.2 SPB_17.2 compnts.dat in the folder in which to
copy. Now update the default path is the folder SPB_17.2 install.

After the installation, the folder and the folder Crack Crack, tools folder in the folder
SPB_17.2 copy and then run the file ToolsPubKey.bat. After the closure of the
window operation, all the files and folders
in the folder to the folder SPB_17.2 SPB_17.2 move. The folder name in the form
of the previous SPB_17.2 SPB_17.2 back

Note:apply Hotfix before apply patch the files (Use Cadence SPB OrCAD 17.2-2016 Crack Fixed from hotfix folder for crack.

Whats New:
Fixed CCRs: SPB 17.2 HotFix 051

01-30-2019

2015843 ADW LIBDISTRIBUTI Error for library distribution (lib_dist_client) regarding string index out-of-range
1869914 ADW PART_BROWSER Adding components to System Capture schematic canvas takes long time in Linux clusters
2010458 ADW PART_BROWSER RefDes values not appearing on parts
2022630 ADW PART_MANAGER Unable to successfully import a DE-HDL Design into System Capture
2005033 ALLEGRO_EDITOR 3D_CANVAS 3D Flex issues: Error message when opening design with bends in 3D viewer
2023496 ALLEGRO_EDITOR 3D_CANVAS Error for designs with bend in 3D Viewer
2033459 ALLEGRO_EDITOR 3D_CANVAS 3D Canvas error: All bend operations are disabled due to licensing and/or DLL installation
1996431 ALLEGRO_EDITOR ARTWORK Via holes for connection have incorrect coordinates in Gerber
1995656 ALLEGRO_EDITOR DATABASE Attaching and Detaching a text file created with SKILL writeTable() function corrupts the text file
2027122 ALLEGRO_EDITOR DATABASE PCB Editor crashes when creating Place Replicate module
2023916 ALLEGRO_EDITOR DFM DFF Annular Ring: Thru via pad to Mask violates on via in pad instances.
2024523 ALLEGRO_EDITOR DFM PCB Editor crashes in Mask To Trace check of DFF.
2021318 ALLEGRO_EDITOR IN_DESIGN_ANA Integrated Analysis and Checking: Unable to run simulation with Crosstalk flow
2014162 ALLEGRO_EDITOR NC Backdrill results using an OrCAD Professional license showing wrong values with hotfix 048
2010791 ALLEGRO_EDITOR PLACEMENT Setting dfa_pause_level to 3 and then moving and rotating part places the part with offset
2017112 ALLEGRO_EDITOR PLACEMENT place_boundary shown at wrong location when moved with User pick and footprints rotated
2028048 ALLEGRO_EDITOR PLACEMENT Rotate option using pick is rotating the outlines in different axis in view
2028314 ALLEGRO_EDITOR PLACEMENT Crash on moving components in Allegro PCB Editor
2029235 ALLEGRO_EDITOR PLACEMENT PCB Editor crashes when moving more than one component and hovering on IC
2022644 ALLEGRO_EDITOR SHAPE dv_fixfullcontact obsolete in release 17.2-2016
2023322 ALLEGRO_EDITOR SHAPE Gloss does not add teardrops on all clines.
2024235 ALLEGRO_EDITOR SHAPE Copper Pour disappears when area includes parts
2024531 ALLEGRO_EDITOR SHAPE rki_autoclip is not working at a special XY location
2024599 ALLEGRO_EDITOR SHAPE Cannot create round corner for shape
2024707 ALLEGRO_EDITOR SHAPE In-line void control does not work when there is no_shape_connect property attached
2026849 ALLEGRO_EDITOR SHAPE Cannot assign region name using the 'next' operation
2030156 ALLEGRO_EDITOR SHAPE Shape Area report for cross-hatched shape includes hatching and boundary
1852981 ALLEGRO_EDITOR SKILL Error message while creating Copper Mask layer without a name using SKILL not clear
1968054 ALLEGRO_EDITOR SKILL Document of axlClearObjectCustomColor should indicate that it can clear color for DBID of Net
2026429 ALLEGRO_EDITOR UI_FORMS PCB Footprint wizard: horizontal and vertical lead pitch level reversed in the image
1768032 ALLEGRO_EDITOR UI_GENERAL Numeric keypad does not work for file selection shortcut
1797376 ALLEGRO_EDITOR UI_GENERAL Release 17.2-2016: Padstack Designer saves padstack to the working directory when script is used
1798524 ALLEGRO_EDITOR UI_GENERAL Unable to save a padstack using script
1823031 ALLEGRO_EDITOR UI_GENERAL Help not working for OrCAD Productivity Toolbox
1849921 ALLEGRO_EDITOR UI_GENERAL Analyze menu missing in OrCAD PCB SI
1951740 ALLEGRO_EDITOR UI_GENERAL Trigger for 'open' does not work when opening a .dra file
1952163 ALLEGRO_EDITOR UI_GENERAL Analyze menu missing in OrCAD PCB SI
1982966 ALLEGRO_EDITOR UI_GENERAL SKILL command to access the Option window fields while in Interactive commands.
1983567 ALLEGRO_EDITOR UI_GENERAL Alias with Ctrl not working with 'command window history' variable enabled
1989507 ALLEGRO_EDITOR UI_GENERAL Third-party tool causes PCB Editor to stop responding to command
2003511 ALLEGRO_EDITOR UI_GENERAL Aliases using control (tilde) characters stopped working after upgrading to hotfix 048
2010418 ALLEGRO_EDITOR UI_GENERAL New command window breaks funckeys
2018201 ALLEGRO_EDITOR UI_GENERAL SKILL axlDBControl ('activeLayer /') updates active class/subclass but ministatus form not updated
2023468 ALLEGRO_EDITOR UI_GENERAL axlZoomInOut does not zoom out, always zooms in regardless of zoom factor (positive or negative)
2026428 ALLEGRO_EDITOR UI_GENERAL PCB Editor takes several minutes when saving a design
2032697 ALLEGRO_EDITOR UI_GENERAL Funckeys with Ctrl not working with 'command window history' variable enabled
2032717 ALLEGRO_EDITOR UI_GENERAL Funckey combinations, such as Ctrl + M, not working
2014211 ALLEGRO_VIEWER OTHER Arrow keys are not panning in Allegro Physical Viewer
2039081 CAPTURE NETLISTS Netlist not created: netlist fails for numeric pin names with backslash '\'
1993057 CONCEPT_HDL CONSTRAINT_MG Constraints disappear in hierarchical design (Electrical->Net->Routing->Relative Propagation Delay)
2004641 CONCEPT_HDL CONSTRAINT_MG 'Save Hierarchy' (hier_write) deletes bus object in Constraint Manager
2020901 CONCEPT_HDL CONSTRAINT_MG Incorrect match Groups created in CM (TDO design)
2014979 CONCEPT_HDL CORE The active schematic page randomly changes while editing text
2027905 CONSTRAINT_MGR DATABASE Pin Property changes in CM during uprev to release 17.2-2016
1762263 ORBITIO INTERFACES Add set allegro_orbit_import variable to user preference
2005860 PSPICE LIBRARIES Error when simulating design with TL494 part in release 17.2-2016
1980072 PSPICE SIMULATOR Noise in the waveform when using DELAYT and DELAYT1 with capacitor
1977615 RELEASE INTEGRATION Cannot import third-party schematics into OrCAD Capture in release 16.6
2027009 RF_PCB SETUP 'RF-PCB' - 'Setup' changes not saved on Apply
2002040 SIP_LAYOUT MANUFACTURING IPC 356 'ignore die layers' does not work: netlists to die
2024703 SIP_LAYOUT WLP Cannot Add Pin Text: Error on 'Manufacturing' - 'Documentation' - 'Display Pin Text'
2010045 SYSTEM_CAPTURE CANVAS_EDIT Cannot snap back vertical CAP until moved up and down horizontally
2010443 SYSTEM_CAPTURE CANVAS_EDIT Cannot select the CAP part
2012843 SYSTEM_CAPTURE PACKAGER Cannot short two grounds in the schematic
2015574 SYSTEM_CAPTURE PACKAGER System Capture is treating quotes in PTF files differently from DE-HDL
2022653 SYSTEM_CAPTURE VARIANT_MANAG Variant Editor - Allow Alternates where ALT_SYMBOL is a valid match for JEDEC_TYPE
2024742 TDA SHAREPOINT Accessing projects is taking time
2010531 XTRACTIM OTHER Allegro crash on repaint of command window
2022351 XTRACTIM OTHER XtractIM is crashing the latest HF S049

HOMEPAGE
https://www.cadence.com/content/cadence-www/global/en_US/home.html

Немного информации об материале: 13-02-2019, 17:30 наш лучший журналист - apple2000 написал статью - "Cadence SPB Allegro and OrCAD v17.20.051 Hotfix Only (x64)" и сразу же добавил её к нам на сайт! Хотелось бы добавить, что наш журналист подобрал лучшее оформление и качественное содержание данной новости. Так же советуем вам посетить категорию Софт, чтобы найти другие отличные материалы, как и этот!