HSMWorks powerful plug and integrated CAM software solution is Salydvrk. It provides capabilities that will ultimately increase your productivity. This plug-in connection and proper coordination between the models made by the Solid Framework establishes processes and machines. When you make changes in the design model. At the same time, these changes are automatically reflected on the map will be model and toolpath. The program benefits from parallel processing is Njayyy.


This plugin uses the optimal strategies of the Perth minimize cutting and the cutting path may be the most optimal. This plug-in Salydvrk installed, so you extend the capabilities of this plug-in features application base Salydvrk too are an example of the model and identify conflicts may analyze the pressure between the parts and features that environment Salydvrk on gives you . The plugin supports a variety of different codes for CNC machine tools at your disposal to evaluate the model and using it possible to simulate the operation of milling, drilling and cutting, etc. is allowed.

Features and HSMWorks:
-The possibility of milling 2. 2.5D
-Optimization of consumables and reducing final fling
-Take advantage of several different codes for CNC machines
-Ability to simulate and evaluate the results
-Toolpath simulation are possible
-The possibility of drilling and drilling operations
-The machining 3D, 3 + 2 and 5-axis

WHATS NEW:
New in this Version:
-When there is more than one body in the model, no automatic selection of all the bodies will be done when creating a new Setup. (#8140)
-Added the ability for a grooving tool to go a specified distance below the inner radius while facing the part in a groove turning operation. (#11148)
-Fixed a problem with the retract at the shifted position when expanding the Fine Boring cycle for the post processor. (#11350)
-Avoid creating an extra tool entry when creating a new tool. (#11944)
-Added a new parameter "make sharp corners" to a profile turning toolpath to ensure that outside corners are sharp and not rounded. (#12010)
-Fixed an issue for Turning Profile operations in which leads were not generated at an angle with respect to the toolpath direction when "Use Fixed Lead Direction" was turned off. The problem occurred in both roughing and finishing passes. (#9944, #10284)
-Fixed excessive tool library load time with Harvey tools installed. (#11587)

Changes to toolpath generation:
-For the Engrave toolpath, improved the ordering to reduce the distance which the tool jumps when moving between letters in engraved text. (#4968)
-Fixed a problem in the Pocket strategy that could cause an operation to freeze and not finish. (#10484)
-Fixed an issue with the Turning Profile and Turning Groove operations where the tool was not cutting to the inner radius if there was a hole with a diameter greater than the inner radius. (#9921, #10106)
-Fixed an issue where gouge checking for Turning Profile leads was incorrectly being done for the tool nose center instead of the tool contact point. (#11298)

Changes to API:
-Fixed missing update of parameters when using HSMWorks_setObjectToolById().
-Added advanced API HSMWorks_setObjectGeometry2() to allow geometry override entity flags to be set.

HOMEPAGE
https://www.autodesk.com/

Немного информации об материале: 1-02-2019, 18:07 наш лучший журналист - apple2000 написал статью - "Autodesk HSMWorks 2019.3 R4.43461 (x64) Multilanguage" и сразу же добавил её к нам на сайт! Хотелось бы добавить, что наш журналист подобрал лучшее оформление и качественное содержание данной новости. Так же советуем вам посетить категорию Софт, чтобы найти другие отличные материалы, как и этот!