InventorCAM is a new generation CAD / CAM system developed by Israeli firm SolidCAM Ltd (the Official Distributor in Russia - Consistent Software). This system is a complete solution for the automation of metal production. Using the wide range of strategies offered by InventorCAM for turning, milling, turning-milling and electroerosive machining, the technologist can quickly prepare the necessary set of control programs for machining the product.


InventorCAM functionality
64bit support due to special version for SW 64bit
2.5 axis milling
InventorCAM provides high efficiency and accuracy of 2.5-axis milling of parts. It supports various processing strategies for elements such as contour, sampling (with islands) and groove, as well as various types of machining holes: drilling, countersinking, thread cutting, etc. The system has a wide range of 2.5-coordinate machining capabilities for analytical surfaces.
3-axis milling
InventorCAM provides a wide range of tools that can be effectively used for processing products with complex geometry (dies, molds) and prismatic parts. As a geometry for 3-axis machining, a three-dimensional surface or solid model is used. The system supports various types of roughing and finishing strategies, such as raster processing with a specified or automatically determined raster angle, equidistant processing, projection processing, processing on waterlines, etc.
In addition to the already listed features of 2.5- and 3-axis machining, InventorCAM offers tools for identifying and refining sections that were not processed at previous transitions. It is possible to create a database of typical technological processes. Once created, such a parameterized technological process can be repeatedly used in the future, which significantly reduces production preparation time, increases the reliability of the developed programs, unifies the style of technological development, guarantees the use of only optimal processing technologies and ensures the independence of production from the human factor. The absence of kills is guaranteed by the availability of means of control and visualization of mechanical processing.
Multi-axis processing
InventorCAM offers various tools for creating multi-axis machining control programs on 4- and 5-axis machining centers. The model is installed in a user-defined machining plane, after which the system automatically calculates all the necessary offset and rotation parameters for the part zero. As a result, the preparatory-final transition time is significantly reduced and processing accuracy is improved.
Turning and turning milling
InventorCAM has a wide range of functions for automating the creation of control programs for turning and turning and milling. InventorCAM supports various types of tools, which allows you to effectively produce longitudinal turning, trimming of the ends, grooving, etc. In addition, InventorCAM allows you to automatically produce rough and finishing machining of complex contours. The support of the rotating tool allows you to perform milling and drilling transitions on machining centers.
Electroerosive treatment
The InventorCAM strategy set of wire EDM allows the processing of external and internal contours with a constant and variable angle of inclination. The possibility of 4-axis machining. A special algorithm prevents the fall of the processed material. InventorCAM provides the user with tools to control the physical processing parameters throughout the entire path of the wire.


ATTENTION! To users of Delcam PowerMILL 2015-2016 under Multikey key emulator!
The version of Multikey Emulator 18.1.0 64-bit in this release is NOT COMPATIBLE with Delcam PowerMILL 2015-2016!
The solution for installing both SolidCAM and PowerMILL on the same computer under Multikey is in the PowerMILL 2016 distribution, but the emulator version laid out there requires Windows to be loaded into test mode, which is not required with the emulator version from this distribution

picYear / Release Date: 2018
Version: 2018 SP2 HF5 build 95420
Developer: SolidCAM Ltd
Developer website:
www.solidcam.com

Digit capacity: 64bit
Interface language: Multilingual (Russian is present)
Chinese Simplified, Chinese Traditional, Czech, Danish, Dutch, French, German, Hebrew, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish
Tabletka: Present (TeAM SolidSQUAD-SSQ)
System requirements:
preinstalled Autodesk Inventor 2019 (and below) 64bit only
Additional information:
Quote:
So as not to pump too much!
1. Download the installation of the English version and one (or several) archives with the localizations you need
2. Install the English version
3. Add a folder from the localization archive (archives) to the program directory of the installed program.
4. Use to select the desired language.

Немного информации об материале: 14-11-2018, 16:26 наш лучший журналист - apple2000 написал статью - "InventorCAM 2018 SP2 HF5 Multilang for Autodesk Inventor x64" и сразу же добавил её к нам на сайт! Хотелось бы добавить, что наш журналист подобрал лучшее оформление и качественное содержание данной новости. Так же советуем вам посетить категорию Софт, чтобы найти другие отличные материалы, как и этот!