Altair Inspire Extrude Metal/Polymer 2019.10678 (x64) 2018
Просмотров : 212 19-09-2018, 17:44
Altair Inspire Extrude Metal/Polymer 2019.10678 (x64) 2018
Altair Inspire Extrude Metal/Polymer 2019.10678 (x64) 2018
x64 | Language:English | File Size: 2.44 GB
Description:
Altair Inspire Extrude Metal:
Altair Inspire Extrude Metal (formerly Click2Extrude Metal) software has been designed with its end users in mind. The entire simulation environment has been upgraded to address a wide variety of users, from beginners to experts and from production engineers to process designers. Altair Inspire Extrude Metal allows for simulations to be performed quickly and accurately without the inconvenience of complicated tools and interfaces.
Altair Inspire Extrude Polymer:
Altair Inspire Extrude Polymer (formerly Click2Extrude Polymer) software is a simulation based environment designed to help polymer extrusion companies meet the ever increasing demands to produce complex profiles with tight tolerances, quality surface finishes and high strength properties at reduced cost. Click2Extrude Polymer is a virtual press where users can visualize material flow and temperature inside a die during extrusion and make necessary changes to ensure balanced flow, while identifying and eliminating product defects.
Details:
Altair Inspire Extrude (ex Click2Extrude) Metal / Polymer 2019.10678
Win64 Year / Date of Release:2019
Version:2019 Build 5364
Developer:solidThinking,
Architecture:64bit
Language:English
Crack : Present (TeAM SolidSQUAD-SSQ)
System requirements:
Operating Systems:
-Windows 7, Windows 8.1, Windows 10 (x64 bit only)
Hardware:
-OpenGL graphics card with at least 256 MB of onboard memory
-Integrated Intel graphics hardware is currently not supported/li>
Memory:
-4 GB of RAM (8 GB recommended)
-10 GB or more of free hard disk spaceWhats New:
Inspire_Extrude_Metal_2019_release_notes:
-Altair Inspire Extrude 2019 includes the following new features and enhancements.
Units-Based Licensing
-Altair Inspire Extrude now supports units-based licensing for both solidThinking and HyperWorks customers.
-To activate your license, select File > Licensing and enter your credentials in the License Setup window. solidThinking customers have
-the option of using Offline Mode so you can continue to run the application when you are not connected to the internet.
-Details about how to activate your license are available in the Licensing and Installation Guide.
New Features:
-General Measure Tool Enabled in Post-Processing
-The ability to measure the distance between two points in a deformed shape is enabled, even during post-processing.
-This helps the user to measure the deformation in regions/sections of interest.
-Velocity Descriptions in Post-Processing
-Vector Descriptions are enabled in post-processing to help the user to better visualize vector results such as velocity and
displacement.
Workflow Videos:
-Workflow videos are enabled for all tools on most clickable actions to illustrate their use and to help the user understand
the features more easily.
New Features:
-Metal Extrusion Improvements to Bearing Lines Import
Altair Inspire Extrude allows users to import bearing lines from a file instead of extracting them from the bearing
geometry.
-Often, this is imported in IGES format. This import process is now improved to group the lines into a -single part instead of bringing in each line segment as a separate part, making the import process easier.
Improvements to Mandrel Mesh:
-Automatic meshing is improved to create a finer mesh in the mandrel region of the die which helps to capture the mandrel
deformation and its effect on profile nose cone more accurately.
Resolved Issues
-Improvements to Batch Meshing and Job Submission Process
-Minor bugs and inconsistencies with the batch mesh and job submission process were addressed.
Inspire_Extrude_Polymer_2019_release_notes:
-Altair Inspire Extrude 2019 includes the following new features and enhancements.Units-Based Licensing
-Altair Inspire Extrude now supports units-based licensing for both solidThinking and HyperWorks
customers.
-To activate your license, select File > Licensing and enter your credentials in the License Setup window.
-solidThinking customers have the option of using Offline Mode so you can continue to run the application when you are not connected to the internet.
-Details about how to activate your license are available in the Licensing and Installation Guide.
New Features:General
-File Import Enhancement
-The importing of models in IGES format is improved, and entities such as lines come in fewer groups.
Measure Tool Enabled in Post-Processing
-The ability to measure the distance between two points in a deformed shape is enabled, even during post-processing.
-This helps the user to measure the deformation in regions/sections of interest.
Velocity Descriptions in Post-Processing
-Vector Descriptions are enabled in post-processing to help the user to better visualize vector results such as velocity and
displacement.
Workflow Videos:
0Workflow videos are enabled for all tools on most clickable actions to illustrate their use and to help the user understand
the features more easily.
Resolved Issues:
-Material Specification at Inlet BC
-The material list shown in the Inlet BC specification is now in sync with the Selected Material list in the Material Database.
-If a material is deselected from the Selected Material list, this material is automatically removed from the Inlet BC as well.
-If the user deselects a material that is in use, the user is warned to not deselect it.
Polymer Layer Organization
When the user organizes a polymer, the tool and other extraneous parts are moved to a group named "undefined."
-In the legend table, this "undefined" group is now shown at the bottom, instead of the top, for ease of use. In addition,
-improvements were made in automatic layer organization.
Homepage
https://solidthinking.com/
DOWNLOAD LINKS :
Altair Inspire Extrude Metal/Polymer 2019.10678 (x64) 2018
x64 | Language:English | File Size: 2.44 GB
Description:
Altair Inspire Extrude Metal:
Altair Inspire Extrude Metal (formerly Click2Extrude Metal) software has been designed with its end users in mind. The entire simulation environment has been upgraded to address a wide variety of users, from beginners to experts and from production engineers to process designers. Altair Inspire Extrude Metal allows for simulations to be performed quickly and accurately without the inconvenience of complicated tools and interfaces.
Altair Inspire Extrude Polymer:
Altair Inspire Extrude Polymer (formerly Click2Extrude Polymer) software is a simulation based environment designed to help polymer extrusion companies meet the ever increasing demands to produce complex profiles with tight tolerances, quality surface finishes and high strength properties at reduced cost. Click2Extrude Polymer is a virtual press where users can visualize material flow and temperature inside a die during extrusion and make necessary changes to ensure balanced flow, while identifying and eliminating product defects.
Details:
Altair Inspire Extrude (ex Click2Extrude) Metal / Polymer 2019.10678
Win64 Year / Date of Release:2019
Version:2019 Build 5364
Developer:solidThinking,
Architecture:64bit
Language:English
Crack : Present (TeAM SolidSQUAD-SSQ)
System requirements:
Operating Systems:
-Windows 7, Windows 8.1, Windows 10 (x64 bit only)
Hardware:
-OpenGL graphics card with at least 256 MB of onboard memory
-Integrated Intel graphics hardware is currently not supported/li>
Memory:
-4 GB of RAM (8 GB recommended)
-10 GB or more of free hard disk spaceWhats New:
Inspire_Extrude_Metal_2019_release_notes:
-Altair Inspire Extrude 2019 includes the following new features and enhancements.
Units-Based Licensing
-Altair Inspire Extrude now supports units-based licensing for both solidThinking and HyperWorks customers.
-To activate your license, select File > Licensing and enter your credentials in the License Setup window. solidThinking customers have
-the option of using Offline Mode so you can continue to run the application when you are not connected to the internet.
-Details about how to activate your license are available in the Licensing and Installation Guide.
New Features:
-General Measure Tool Enabled in Post-Processing
-The ability to measure the distance between two points in a deformed shape is enabled, even during post-processing.
-This helps the user to measure the deformation in regions/sections of interest.
-Velocity Descriptions in Post-Processing
-Vector Descriptions are enabled in post-processing to help the user to better visualize vector results such as velocity and
displacement.
Workflow Videos:
-Workflow videos are enabled for all tools on most clickable actions to illustrate their use and to help the user understand
the features more easily.
New Features:
-Metal Extrusion Improvements to Bearing Lines Import
Altair Inspire Extrude allows users to import bearing lines from a file instead of extracting them from the bearing
geometry.
-Often, this is imported in IGES format. This import process is now improved to group the lines into a -single part instead of bringing in each line segment as a separate part, making the import process easier.
Improvements to Mandrel Mesh:
-Automatic meshing is improved to create a finer mesh in the mandrel region of the die which helps to capture the mandrel
deformation and its effect on profile nose cone more accurately.
Resolved Issues
-Improvements to Batch Meshing and Job Submission Process
-Minor bugs and inconsistencies with the batch mesh and job submission process were addressed.
Inspire_Extrude_Polymer_2019_release_notes:
-Altair Inspire Extrude 2019 includes the following new features and enhancements.Units-Based Licensing
-Altair Inspire Extrude now supports units-based licensing for both solidThinking and HyperWorks
customers.
-To activate your license, select File > Licensing and enter your credentials in the License Setup window.
-solidThinking customers have the option of using Offline Mode so you can continue to run the application when you are not connected to the internet.
-Details about how to activate your license are available in the Licensing and Installation Guide.
New Features:General
-File Import Enhancement
-The importing of models in IGES format is improved, and entities such as lines come in fewer groups.
Measure Tool Enabled in Post-Processing
-The ability to measure the distance between two points in a deformed shape is enabled, even during post-processing.
-This helps the user to measure the deformation in regions/sections of interest.
Velocity Descriptions in Post-Processing
-Vector Descriptions are enabled in post-processing to help the user to better visualize vector results such as velocity and
displacement.
Workflow Videos:
0Workflow videos are enabled for all tools on most clickable actions to illustrate their use and to help the user understand
the features more easily.
Resolved Issues:
-Material Specification at Inlet BC
-The material list shown in the Inlet BC specification is now in sync with the Selected Material list in the Material Database.
-If a material is deselected from the Selected Material list, this material is automatically removed from the Inlet BC as well.
-If the user deselects a material that is in use, the user is warned to not deselect it.
Polymer Layer Organization
When the user organizes a polymer, the tool and other extraneous parts are moved to a group named "undefined."
-In the legend table, this "undefined" group is now shown at the bottom, instead of the top, for ease of use. In addition,
-improvements were made in automatic layer organization.
Homepage
https://solidthinking.com/
DOWNLOAD LINKS :
Немного информации об материале: 19-09-2018, 17:44 наш лучший журналист - apple2000 написал статью - "Altair Inspire Extrude Metal/Polymer 2019.10678 (x64) 2018" и сразу же добавил её к нам на сайт! Хотелось бы добавить, что наш журналист подобрал лучшее оформление и качественное содержание данной новости. Так же советуем вам посетить категорию Софт, чтобы найти другие отличные материалы, как и этот!