Mechanical Simulation Carsim v2017.1
Просмотров : 199 30-06-2018, 18:21
Mechanical Simulation Carsim v2017.1
Mechanical Simulation Carsim v2017.1 | 1.1 GB
CarSim delivers the most accurate, detailed, and efficient methods for simulating the performance of passenger vehicles and light-duty trucks. With twenty years of real-world validation by automotive engineers, CarSim is universally the preferred tool for analyzing vehicle dynamics, developing active controllers, calculating a car's performance characteristics, and engineering next-generation active safety systems.
CarSim Advantages
CarSim, TruckSim, and BikeSim are used worldwide by over 110 OEMs and Tier 1 suppliers and over 200 universities and government research labs. (There are more than 1500 active CarSim seats, not including driving simulators or students). Here are some reasons why so many engineers have selected CarSim:
CarSim is used extensively by 7 of the 10 largest automotive OEMs. OEM users consistently find close agreement between CarSim predictions and test results.
CarSim works as a standalone application; it does not require any other software to perform simulations.
CarSim has a standard interface to MATLAB/Simulink.
CarSim allows users to build complex scenarios and test event sequences.
CarSim supports:
Software-in-the-loop
Model-in-the-loop
Hardware-in-the-loop
Driver-in-the-loop
CarSim has an intuitive user interface and powerful analysis tools (see the linked video series in the sidebar).
CarSim supports vehicle sensors and interactive traffic for V2V and ADAS development.
CarSim includes numerous example vehicles, roads, and procedures to assist first-time users.
CarSim includes over 1900 pages of indexed documentation covering all aspects of the software.
CarSim includes example datasets for 20 vehicle types (with about 80 variants in total), used in about 200 example simulations.
CarSim is economical in comparison to other commercial vehicle dynamics software tools.
VehicleSim Technology
CarSim, BikeSim, and TruckSim all use technology first introduced in 1990 and developed continuously since then. Efficient parametric math models reproduce system-level vehicle dynamics behavior, under the control of a GUI intended for engineers who need to evaluate vehicle/controller behavior without spending weeks of training. VehicleSim products also include the VS Visualizer tool for viewing simulations with plots and photo-realistic animation.
In addition to the built-in capabilities of the CarSim models, the VehicleSim software tools include methods to extend the capabilities with user-defined programs and/or connections to third-party software:
Commercial simulation environments Simulink (the MathWorks), LabVIEW (National Instruments), and ASCET (ETAS).
Simulation environents that support the Functional Mockup Interface (FMI); CarSim can automatically generate Functional Mockup Units (FMUs) that work in many external software environments.
VS Commands (the built-in scripting language).
Run with custom programs (MATLAB, Visual Basic, C/C++) using VS API (application program interface).
Run with remote control via Windows COM and other methods.
Support of HIL (hardware in the loop) testing on major RT (real time) platforms.
Support of driving simulators that use CarSim as the RT vehicle math model.
DOWNLOAD LINKS :
Mechanical Simulation Carsim v2017.1 | 1.1 GB
CarSim delivers the most accurate, detailed, and efficient methods for simulating the performance of passenger vehicles and light-duty trucks. With twenty years of real-world validation by automotive engineers, CarSim is universally the preferred tool for analyzing vehicle dynamics, developing active controllers, calculating a car's performance characteristics, and engineering next-generation active safety systems.
CarSim Advantages
CarSim, TruckSim, and BikeSim are used worldwide by over 110 OEMs and Tier 1 suppliers and over 200 universities and government research labs. (There are more than 1500 active CarSim seats, not including driving simulators or students). Here are some reasons why so many engineers have selected CarSim:
CarSim is used extensively by 7 of the 10 largest automotive OEMs. OEM users consistently find close agreement between CarSim predictions and test results.
CarSim works as a standalone application; it does not require any other software to perform simulations.
CarSim has a standard interface to MATLAB/Simulink.
CarSim allows users to build complex scenarios and test event sequences.
CarSim supports:
Software-in-the-loop
Model-in-the-loop
Hardware-in-the-loop
Driver-in-the-loop
CarSim has an intuitive user interface and powerful analysis tools (see the linked video series in the sidebar).
CarSim supports vehicle sensors and interactive traffic for V2V and ADAS development.
CarSim includes numerous example vehicles, roads, and procedures to assist first-time users.
CarSim includes over 1900 pages of indexed documentation covering all aspects of the software.
CarSim includes example datasets for 20 vehicle types (with about 80 variants in total), used in about 200 example simulations.
CarSim is economical in comparison to other commercial vehicle dynamics software tools.
VehicleSim Technology
CarSim, BikeSim, and TruckSim all use technology first introduced in 1990 and developed continuously since then. Efficient parametric math models reproduce system-level vehicle dynamics behavior, under the control of a GUI intended for engineers who need to evaluate vehicle/controller behavior without spending weeks of training. VehicleSim products also include the VS Visualizer tool for viewing simulations with plots and photo-realistic animation.
In addition to the built-in capabilities of the CarSim models, the VehicleSim software tools include methods to extend the capabilities with user-defined programs and/or connections to third-party software:
Commercial simulation environments Simulink (the MathWorks), LabVIEW (National Instruments), and ASCET (ETAS).
Simulation environents that support the Functional Mockup Interface (FMI); CarSim can automatically generate Functional Mockup Units (FMUs) that work in many external software environments.
VS Commands (the built-in scripting language).
Run with custom programs (MATLAB, Visual Basic, C/C++) using VS API (application program interface).
Run with remote control via Windows COM and other methods.
Support of HIL (hardware in the loop) testing on major RT (real time) platforms.
Support of driving simulators that use CarSim as the RT vehicle math model.
DOWNLOAD LINKS :
Немного информации об материале: 30-06-2018, 18:21 наш лучший журналист - apple2000 написал статью - "Mechanical Simulation Carsim v2017.1" и сразу же добавил её к нам на сайт! Хотелось бы добавить, что наш журналист подобрал лучшее оформление и качественное содержание данной новости. Так же советуем вам посетить категорию Софт, чтобы найти другие отличные материалы, как и этот!
→ Смотрит облако тегов